Smartoptics Group AS
Smartoptics Group AS
05/13/2022 | Press release | Distributed by Public on 05/13/2022 00:10
Smartoptics announces DCP-404 muxponder for 100G aggregation into 400G DWDM
Tid13.05.2022, 06:00:07
MeldingsID562193
UtstederIDSMOP
MarkedEuronext Growth (Oslo)
Andre språk
Korrigerte versjoner
KategoriIKKE-INFORMASJONSPLIKTIGE PRESSEMELDINGER
Vedlegg
Del melding
Smartoptics announces DCP-404 muxponder for 100G aggregation into 400G DWDM
Oslo, Norway - May 13, 2022 - Smartoptics (Euronext: SMOP), a leading provider
of optical networking solutions, today announced the release of the DCP-404
muxponder (https://www.smartoptics.com/products/transponders-muxponders/) for
100G aggregation into 400G DWDM. The DCP-404 delivers ease of use, cost
efficiency and low latency to network operators, positioning it for metro
networks.
The DCP-404 is a layer 1, OpenZR+-capable muxponder with support for four 100G
client links and 400G in the line interface. This gives network operators the
flexibility to deploy 100G, 200G, 300G or 400G DWDM.
"With the capability to use four times 100G over a 400G line, the DCP-404
increases fiber utilization, providing more capacity per wavelength at a lower
latency then a traditional muxponder. This will serve as a key enabler for
larger and more complex network deployments. When combined with our DCP-R family
of ROADMs (https://www.smartoptics.com/products/open-line-systems/), the DCP-404
is a significant upgrade to our metro network offering," says Kent Lidström, CTO
Smartoptics.
The DCP-404 muxponder supports a wide range of QSFP28 transceivers on the client
side and a single coherent 400ZR/400ZR+ QSFP-DD transceiver for the line port.
Based on standardized, pluggable mass-produced optics, the muxponder will offer
a very attractive price point for customers.
"With no configuration needed at all and high flexibility in terms of supported
optics, the DCP-404 is designed to be as easy to deploy and use as possible. The
muxponder is unique in offering QSFP-DD line support, and when combined with
industry-leading low power consumption, it offers unmatched cost efficiency. We
see the DCP-404 as a major step forward for us, further solidifying our role as
a rapidly growing market challenger in easy-to-use, disaggregated DWDM
networking," says Kent Lidström, CTO Smartoptics.
For further information please contact:
Kent Lidström
CTO
Smartoptics
Telephone: +47 214 174 00
Email: [email protected]
About Smartoptics
Smartoptics provides innovative optical networking solutions and devices for the
new era of open networking. Our customer base includes thousands of enterprises,
governments, cloud providers, Internet exchanges as well as cable and telecom
operators. We have an open networking approach in everything we do which allows
our customers to break unwanted vendor lock-in, remain flexible and minimize
costs. Our solutions are used in metro and regional network applications that
increasingly rely on data center services and specifications. Smartoptics is a
Scandinavian company?founded in 2006. We partner with leading technology and
network solution providers such as Brocade, Cisco and Dell and have a global
reach through more than 100 business partners.
For additional information about Smartoptics, please visit
https://www.smartoptics.com
of optical networking solutions, today announced the release of the DCP-404
muxponder (https://www.smartoptics.com/products/transponders-muxponders/) for
100G aggregation into 400G DWDM. The DCP-404 delivers ease of use, cost
efficiency and low latency to network operators, positioning it for metro
networks.
The DCP-404 is a layer 1, OpenZR+-capable muxponder with support for four 100G
client links and 400G in the line interface. This gives network operators the
flexibility to deploy 100G, 200G, 300G or 400G DWDM.
"With the capability to use four times 100G over a 400G line, the DCP-404
increases fiber utilization, providing more capacity per wavelength at a lower
latency then a traditional muxponder. This will serve as a key enabler for
larger and more complex network deployments. When combined with our DCP-R family
of ROADMs (https://www.smartoptics.com/products/open-line-systems/), the DCP-404
is a significant upgrade to our metro network offering," says Kent Lidström, CTO
Smartoptics.
The DCP-404 muxponder supports a wide range of QSFP28 transceivers on the client
side and a single coherent 400ZR/400ZR+ QSFP-DD transceiver for the line port.
Based on standardized, pluggable mass-produced optics, the muxponder will offer
a very attractive price point for customers.
"With no configuration needed at all and high flexibility in terms of supported
optics, the DCP-404 is designed to be as easy to deploy and use as possible. The
muxponder is unique in offering QSFP-DD line support, and when combined with
industry-leading low power consumption, it offers unmatched cost efficiency. We
see the DCP-404 as a major step forward for us, further solidifying our role as
a rapidly growing market challenger in easy-to-use, disaggregated DWDM
networking," says Kent Lidström, CTO Smartoptics.
For further information please contact:
Kent Lidström
CTO
Smartoptics
Telephone: +47 214 174 00
Email: [email protected]
About Smartoptics
Smartoptics provides innovative optical networking solutions and devices for the
new era of open networking. Our customer base includes thousands of enterprises,
governments, cloud providers, Internet exchanges as well as cable and telecom
operators. We have an open networking approach in everything we do which allows
our customers to break unwanted vendor lock-in, remain flexible and minimize
costs. Our solutions are used in metro and regional network applications that
increasingly rely on data center services and specifications. Smartoptics is a
Scandinavian company?founded in 2006. We partner with leading technology and
network solution providers such as Brocade, Cisco and Dell and have a global
reach through more than 100 business partners.
For additional information about Smartoptics, please visit
https://www.smartoptics.com