Oubao Security Technology Co. Ltd.

09/28/2022 | News release | Distributed by Public on 09/28/2022 02:19

Care and precautions for panic exit devices

The panic exit deviceis a device that consumers have seen a lot of, but have not seen much about its maintenance. Therefore, we hope that you can deepen your understanding of the maintenance of the panic exit device under my introduction so that you can use it and make it last longer. Let's take a look at the maintenance and precautions for the shopping mall panic exit device. Here are some answers.

Here is the content list:

l Tips for maintaining your panic exit device.

l Correct maintenance methods and precautions for panic exit devices.

Tips for maintaining your panic exit device.

Firstly, it is important to carry out regular maintenance on the panic exit device. Although panic exit devices are resistant to corrosion, they will eventually oxidize if left exposed to corrosive environments for a long time. Therefore, the surface of the panic exit device must be regularly cleaned and maintained to maintain its gorgeous surface and extend its life. Secondly, do not scratch the panic exit device when cleaning it. When cleaning the surface of the airport panic exit device, care must be taken not to scratch the surface and to avoid using bleach and abrasive detergents, steel wire balls, abrasive tools, etc. To remove the detergent, rinse the surface with clean water at the end of washing. Thirdly, use professional detergent to clean panic exit devices. panic exit device surface trademark, sticker, use warm water, weak detergent to wash, binder ingredients, use alcohol or organic solvent (ether, benzene) to scrub stainless steel surface grease, oil, lubricant pollution, wipe clean with a soft cloth later, use neutral detergent or ammonia solution or use special If the surface of the cinema panic exit device has bleach and various acids attached to it, rinse it immediately with water, then dip it in ammonia solution or neutral carbonic acid soda solution, and rinse it with neutral detergent or warm water. Rust caused by dirt on the surface of the panic exit device can be washed with 10% nitric acid or abrasive detergent, or with special detergents.

Correct maintenance methods and precautions for panic exit devices.

Firstly, the correct maintenance method will determine the life of the hotel panic exit device! Secondly, it is strictly forbidden to use any highly abrasive and alkaline liquids for cleaning the panic exit device, such as detergents, washing-up liquid, and other liquids. Wiping only requires a small amount of industrial alcohol and a soft cloth to wipe the surface. Thirdly, care should be taken not to use corrosive cleaning agents when cleaning and to ensure that water does not flow into the interior to avoid malfunction.

For more information about the panic exit device, please contact us. With many years of experience in R&D and production, we can provide you with more product services and technical support! Our official website is http://www.oubao.com/. Our company adheres to the corporate culture of "quality-oriented, customer first", and always strives to become a professional fire panic exit device supplier in the industry.