How and When to Add Bend Reliefs to Sheet Metal Parts

When to Use Bend Reliefs

A bend relief prevents tears from occurring where there is a transition between bends or between a bend and a flat surface. They are a great way to ensure a clean looking part that is free from deformation, burrs, and sharp points where the bend edges terminate. This is doubly important if your part is subject to vibration or flexion as the tears and cracks created by unrelieved bends will tend to propagate rapidly. Using round reliefs instead of reliefs with square corners will also help to reduce tear and crack propagation. Ultimately, well-designed bend reliefs create a part that is stronger, more stable, and attractive.

Bend Relief Advantages

Adding a bend relief:

Prevents tearing and deformation of your part caused by a press brake

No tears means the part that's safer to hold, easier to manufacture, more durable, and will yield a better looking, customer-friendly part when manufacturing is complete

Separates bent and unbent elements of your part

Isolating the bent portion of your part makes it more durable and attractive

Ensures forming accuracy

Bend reliefs give the press brake operator some wiggle room with tool placement. Erring on the side of caution by using a wide bend relief will go far to make the press brake operator's job easier, safer, and more accurate. This can translate to cost savings, particularly when you move to higher volume production, as forming setup and run time will be reduced.

Public link

Please use the above public link if you want to share this noodl on another website.