The University of Hong Kong
The University of Hong Kong
04/21/2024 | Press release | Distributed by Public on 04/20/2024 22:09
HKU Engineering researchers achieve breakthrough in cellular force imaging using diamond-based quantum sensing microscope
Back
Hide captionShow caption
HKU Engineering researchers achieve breakthrough in cellular force imaging using diamond-based quantum sensing microscope
21 Apr 2024
[Link]
Schematic diagram illustrating the design of QDMTM. The left panel shows the working principle of the widefield quantum diamond microscope. The insert shows how the exerted cellular forces can be quantified by measuring NV centres. The right panel shows the exact force sensing mechanism. MW antenna: microwave antenna; OBJ: objective; DM: dichroic mirror.
[Link]
Demonstrated detection of the traction forces of the adhered cells. Three typical cells, namely the (A) well-spread cell, (B) less-spread cell and (C) cell-cell contacted cells were chosen to demonstrate the measurements: the first two columns show the transmitted light images and corresponding marked images; the third column shows the T1 mapping and the last column shows the line profile, as-marked in 2nd and 3rd column, of T1 value across the cell body. (D) T1 values changes in selected areas of cells.
[Link]
Simulation-assisted extraction of cellular forces from T1 mapping. (A) The schematics show the simplified model: a layer of NV centers is randomly distributed underneath the upper surface of diamond membrane with a given depth and fixed density; a layer of the Gd3+ complexes attached to the PEG acts as a randomly fluctuating spin bath; the aforementioned two layers are separated by spring-like PEG molecules and their force-induced extension is described by Worm-Like Chain model. The red rectangular area represents the minimum sensing area adopted (600 nm × 600 nm). (B) The simulated relationship between cellular forces and T1 value. The extracted (C) PEG extension map, and (D) cellular traction force map of cell body in one chosen cell (the same one in Fig. 6B). The insert is the enlarged view of selected rectangular area. (E) Force profile along the blue line drawn in Fig. 7D. The direction of the cellular force exerted on the PEG polymer is normal to the diamond surface.
Professor Zhiqin Chu (right) and Feng Xu (left), the first author of the research paper
The project, led by Professor Zhiqin Chu from the Department of Electrical and Electronic Engineering at the University of Hong Kong (HKU), and Professor Qiang Wei from Sichuan University, applied label-free quantum sensing technology to measure cellular force on a nanoscale. This overcomes the limitations of traditional cellular force apparatus and offers new insights into studying cellular mechanics, including the influence of cellular adhesion forces on cancer cell spreading.
The research team has developed a new Quantum-Enhanced Diamond Molecular Tension Microscopy (QDMTM) that offers an effective approach for studying cell adhesion forces. Compared to cell force measurement methods that utilise fluorescent probes, QDMTM has the potential to overcome challenges such as photobleaching, limited sensitivity, and ambiguity in data interpretation. Furthermore, QDMTM sensors can be cleaned and reused, enhancing the absolute accuracy of comparing cell adhesion forces across various samples.
The new method fundamentally changes the way for studying important issues such as cell-cell or cell-material interactions, with significant implications for biophysics and biomedical engineering. The findings have been published in Science Advances titled "Quantum-Enhanced Diamond Molecular Tension Microscopy for Quantifying Cellular Forces".
Background of the Research
Cells rely on constant interplay and information exchange with their micro-environment to ensure their survival and perform biological functions. Hence, precise quantification of tiny cellular adhesion forces, spanning from piconewtons to a few nanonewtons, is crucial for understanding the intricacies of force modulation in cells.
Over the past few decades, various methods have been successfully developed for measuring cellular adhesive forces. Currently, several leading technologies such as traction force microscopy (TFM), optical/magnetic tweezers, and molecular tension-based fluorescence microscopy (MTFM) are widely used for measuring cellular forces.
However, these techniques have notable limitations in terms of sensitivity and data interpretation, which impede our ability to comprehensively understand mechanobiology. Additionally, the MTFM technique is hindered by the stochastic nature of fluorophore photobleaching. Therefore, it is essential to develop a new technique that can accurately measure cell adhesive forces in a fluorescent label-free manner. This is crucial to advancing the field of mechanobiology.
Research methods and findings
The research team developed QDMTM by combining the extension of polymer (acting as a force transducer) induced by cellular forces with the longitudinal relaxation time of NV. The unique quantum properties of NV centre electron spins in diamond serve as the fundamental basis for the unprecedented sensitivity and precision of QDMTM.
The uniqueness of this innovation lies in the utilisation of a "force transducer" which is a force-responsive polymer, capable of converting mechanical signals into magnetic signals. By measuring the changes in NV spin relaxation time caused by the magnetic noise, the adhesive forces exerted by cells on the "force transducer" can be determined. Existing measurement techniques are unable to effectively measure the stochastic magnetic signals at the nanoscale.
The innovative QDMTM technique offers an effective approach to studying cell adhesion forces. Through their study, researchers were able to successfully differentiate cells in various adhesion states and found that the magnitude of cellular forces in different cell regions aligned with the previous findings. This suggests that the QDMTM method is capable of accurately measuring cell adhesion forces. The next phase of their research focusses on expanding the quantum sensor from bulk diamond to nanoscale diamond particles, which will allow for the measurement of cell forces in any direction.
Link to the paper: https://www.science.org/doi/10.1126/sciadv.adi5300
Media enquiries:
Faculty of Engineering
Ms Charis Lai (Tel: 3917 1924; Email: [email protected])